Fan Chain Pulls

Cut figures from at least 1/2" thick stock, drill holes for chain, sand edges and paint. Right click on images to download .gif images. These chain pulls also work on table lamps as well.

To balance irregular shaped figures, estimate the center of gravity, insert a small screw-eye and suspend from string. Make any necessary adjustments to the position of the screw-eye, remove it and drill 1/8" hole through object. From the bottom drill 1/4" dia, hole to within 1/4" of top, thread chain from bottom.

For symmetrical shapes with round bottoms drill holes before cutting shape.

Turn hearts upside-down or drill before cutting shape.